Samsung refrigerator errors indicate a malfunction that has occurred in the system. The control module has a self-diagnosis function that detects and displays the error code on the display. The instructions have a decoding of all characters. So you can quickly find the cause of the problem.
Samsung refrigerator malfunctions
Unfortunately, the Samsung refrigerator with Nou Frost does not always give an error. Often, when the sensor breaks down, the technician continues to work, and only after disconnecting from the network a malfunction is displayed on the display. You can turn on the device in test mode, then the system independently determines the cause of the breakdown.
If the error code still appears on the display, you need to find the decryption. Restart the refrigerator first, it may be a system failure:
- Unplug the unit.
- Wait 10-15 minutes.
- Retry the connection.
Did the characters appear on the screen again? Then proceed to decryption in our table. The value may vary depending on the model of technology.
Trouble code | Value | How to fix it yourself |
01 | The ice maker sensor does not work. | If your Samsung model has an ice machine and 01 is displayed, check that it is connected correctly. After that, the sensor is diagnosed and replaced. |
02 | The refrigerator sensor does not work correctly. | Inspect the part in the compartment, check for serviceability. Tighten the connections, inspect the wiring at the time of burning. If defective, replace. |
03 | Error 3 suggests that the defrost sensor is broken. | It is necessary to check the connection of the sensor, the wiring loop. Replace the wiring if it is burnt, and also install a new part. |
04 | The fan in the compartment is not working. | In refrigerators with Nou Frost, the fan accelerates air through the chamber. If it breaks, you may notice an increase in temperature in the compartment. It is necessary to remove the back wall, inspect the connection and connections of the fan. |
05 | Problems with the work of the ice machine. A device that levels and pushes ice does not work. | If the device does not work more than three times, then the item is diagnosed and replaced. |
06 | The sensor does not work in the Cool Select Zone. | Diagnostics and replacement. |
07 | The temperature sensor in the chamber broke. | In electronic models, the sensor measures the temperature in the compartment and sends information to the control module. If it does not work, then the module does not turn off the compressor, which works for wear. You must install a new item. |
08 | The freezer temperature sensor does not signal. | See value 07. |
09 | The defrost sensor in the freezer compartment is not functioning. | Diagnostics are performed with a multimeter. The non-working element is replaced by a working part. |
10 | Incorrect fan operation in the freezer. | Look, perhaps the blades are overgrown with ice, so they rotate poorly. Also inspect the wiring and connection density. With ice, you need to defrost the equipment. |
11 | Condenser fan failed. | It may have become clogged with dust if the capacitor is located outside. Check pins and connections. |
In other models of Samsung refrigerators of various types, including Side-by-Side, the code can be displayed like this:
- R5 or 02 - the refrigerator compartment sensor has failed. It is necessary to check the contacts for a short circuit, to diagnose the part and install a new element.
- D5 or 09 - temperature sensor does not send messages. There is no contact between it and the control board. The module does not receive temperature data in the chamber. Perform diagnostics and replace the faulty element: sensor, wiring, contact repair.
- F5 or 08 - the sensor does not work in the freezer. The solution is similar to the previous case.
- E5 or 07 - the ambient temperature sensor is not functioning. Some models have built-in similar developments. The sensor, measuring the performance outside, helps to automatically adjust the climate inside the camera.
- RD - air damper does not work correctly. Need inspection and repair.
- DD - a problem with the wiring in the refrigerator. It is necessary to inspect the cable for burns and carry out repair work.
To start the refrigerator in test mode, you need to press a certain key combination. How to do this, you can see the instructions. If a control panel is included, you can run the test with it.
- Press two buttons “Free Temp” and “Rel. Temp. "
Important! Test mode is not intended to display a fault code on the display. It only allows you to verify the operability of a particular part.
If the sensor fails, the corresponding indicator will blink on the panel, an audible signal may sound. To cancel the command, hold down the Super Freeze and Supercool keys for 8 seconds.
To start the self-test in normal mode, hold down the same keys, which may also be called “Quick Cool” and “Quick Freeze”. Different LEDs will light up, see the instructions for the meaning. After 30 seconds, the refrigerator will return to normal operation.
In test mode, FF or Fd may appear on the display. These are not error codes. FF symbols indicate that the fan and motor are being checked. You can see for yourself whether the part is rotating or not functioning. Fd indicates diagnostics for the evaporator heater and choke.
With the test, you can quickly detect and fix the breakdown. A video on the topic will help to conduct a self-diagnosis: